Danny Mai's Page

"Thanks Alex.  Our situation has stabilized a little, but we will definitely followup with you to see if we can develop a plugin for it.  Is the version you are referring version 2 or 1.6 / 1.7? We were tying to set up the development…"

"From my experience, it still queues each recipient to send one message for each recipient.  Also, the max number of recipients in the right pane is 100, and you have to page to the next page to get the next set in the group.  What…"

"As we have been researching this more, and converted our outbound messages to use ClickaTell, we still have a capacity issue.  We have over 800 subscribers.  Since FrontlineSMS currently sends messages to each recipient one at a time, it…"

"Thanks Jack.  I did the same as you, and it does seem to allow sending, though I'm not sure why.  I tried just adding the mo and from to other fields and it didn't work, so I guess however it is interpreting the api and sender…"

"Thanks Laura.  If we could speak with someone in the Morning time Nairobi (evening time CDT) that might be helpful as well.  From what I understand of the clickatell…"

"We are looking at the development wiki section about Internet SMS services: https://github.com/frontlinesms/frontlinesms-super-project/wiki And reading about how to extend the services.  Does this mean that we could write/extend the existing…"

"I just spoke with IntelliSMS and they do not provide US sender IDs so there would be problems with US users replying with IntelliSMS to an international origination number.  So I think getting ClickaTell to work similar to IntellisSMS is our…"

"Jack, can you clarify which field you are putting the extra parameters?  We have a modem setup, but we aren't able to figure the round-about from Clickatell to use the modem number either.   Silas, et al. do you all know if…"

"I found this two-way API guide from ClickaTell, which might be helpful for development changes: http://www.clickatell.com/downloads/Clickatell_two-way_technical_guide.pdf "

"I'm having this same issue and am trying to work with Clickatell support today as well (for an urgent project we need working today).  It is "Routing Error" that shows up on the ClickaTell control panel.  ClickATell says it…"